Panasonic KX-P7510 - Manual (Page 66)

Appendix
Parallel interface connector (printer side)
IB 1
N otes
• “Return” denotes the return side wire of a twisted pair cable and is connected to signal
ground.
• Be sure to use onty a shielded cable. The printer will not operate properly if any of the
pins are not connected.
Controller
CPU
Power PC 603e 100MHZ
Emulations
Standard:PCL6
Option: PostScript Level 2
Memory
20 MB Standard
(expandable to a max. of 132 MB with
optional SIMMs)
Interface
Standard:
Parallel Bi-directiona! IEEE 1284
compliant (Nibble, Byte, ECP)
Option:
10/100 Base-T* (auto switching),
LocalTalk/RS-232C, lrDA/RS-232C
(‘Standard for KX-P7510)
Operator panel
Support language: English
8x2 LCD
LCD Display angle adjusting
Font
Resident: 45 Fonts
PS 2: 35 Fonts (optional PS SIMM)
N/W Card
10/100 Base-T (Ethernet)
SNMP/MIB
TCP/IP, IPX/SPX, DCULLC
Netware 3.x, 4.x; 5.0, Windows 95,
Windows 98, Windows NT 4.0, Unix, Mac
Device driver
PCL: Windows 95, Windows 98,
Windows NT 4.0 or
Windows 3.1,3.11
X N ote
PS SIMM Contains the Power Page® Level 2J interpreter from Electronics
for Imaging, tnc.
pwerfsce T
66