Panasonic KX-P7510 - Manual (Page 14)

Before You Start
a
Static electricity damage
■n
o
0)
0
X
1
■0
" n I
cn
o
o
0)
o
o'
№
To prevent static electricity damage to any of the following components, touch a grounded
metal surface, such as the printer’s bare metal frame prior to touching the component.
• The interface connectors—parallel, network, RS-232C, LocalTalk, and IrDA
• Electrical components, connectors inside the printer, any components on the optional
board {network card*^, LocalTalk/RS-232C interface card, lrDA/RS-232C interface card
or SIMMs)
• The connector pins on the optional cassette for the printer
Option forKX-P7500.
Interface cable
Always use a shielded cable. Use of an unshielded cable can result in radio interference
with data.
Waste disposal method
Waste material may be dumped or incinerated under conditions which meet national and
local environmental regulations.
Features of the KX-P7500 Series
The KX-P7500 Series provides fast, high-quality monochrome printing on plain paper,
plus the ease of operation and high performance you expect from a laser printer,
including the following. For detailed information about features, refer to Operating .
Instructions in the KX-P7500 Series CD-ROM.
Model description
KX-P7500 • The KX-P7500 comes standard with 20 MB RAM and one 500-sheet
cassette.
KX-P7510 • The KX-P7510 comes standard with network card (KX-PNB2). Install
the network utilities (Network Setup Tool) for network printing.
Refer to KX-PNB2 Quick Installation Guide.
14