Panasonic KX-P7510 - Manual (Page 63)

Ш Two-sided printing (Dupiex printing)
Two-sided printing is possible by using the MP tray, the 1 st cassette or the OPT cassette
(optional 2nd feeder). However, you should not expect the same print quality and
reliability that you get with one-sided printing. We strongly recommend that you follow the
guidelines below.
• The acceptable paper size is as follows:
— A4 —FOLIO (LEGAL 13")
— LETTER —LEGAL (LEGAL 14")
• Before loading paper in the MP tray, adjust it so that the edges of the media are lightly
touching the media guides of the MP tray.
• Paper weight should be 75 g/m^ to 90 g/m^ (20 to 24 lbs.).
• When printing, avoid printing in fill color in the area within 15 mm (0.59") from the top to
prevent paper jam. (See below)
However, characters are printable in this area.
— Unprintable in fill color area
Appendix
Paper
feed
direction
L a [a: at least 15 mm (0.59")]
—a
Ex. printing in fill color
When single-sided printing, it’s recommended to avoid printing in fill color in this area.
■ Transparencies and labels
You may also print on transparencies and labels that are made for the printer. Panasonic
has tested and found that the following work satisfactorily:
OHP transparency: 3M CG3300
Labels: AVERY 5160, AVERY 5161, AVERY 5162, AVERY 5163,
AVERY 5660, AVERY 5661, AVERY 5662, AVERY 5663
(30 labels or less per sheet) •
• To avoid damaging the printer, use only transparencies and labels recommended for
use in laser printers.
• To avoid damaging the printer, do not use ink jet transparency.
• Transparencies and adhesive material of labels should be stable at 205°C (400°F), the
printer’s maximum temperature.
• Margins for the transparency:
63