Panasonic KX-P7510 - Manual (Page 30)

Setting up the Printer
3
(D
(D
■a
s’
o
^ Adjust the paper guide to the size of the paper inserted by pushing
the guide.
N ote
• Do not bend the envelopes when adjusting the paper guide.
g
Set the source item in the properties window to Manual or MP (see
page 45).
N otes
• When you print on transparencies, select “TRANSPARENCY” from Paper Type List Box
of the printer driver.
• When you print on envelopes or labels, select THICK” from Paper Type List Box of the
printer driver.
Connecting the printer
Using a parallel interface cable
To print directly from an IBM compatible computer, you need to connect your printer to
the computer with a parallel interface cable.
If you do not have a parallel interface cable, you will need to purchase one from your local
computer store or dealer (see “Bi-directional parallel interface" on page 65).
N ote
• Use a shielded bi-directional parallel interface cable.
y Make sure the printer and the computer to which it is to be
connected are turned off and disconnected from the AC outlet.
2 Connect the appropriate end of the parallel interface cable into the
parallel interface connector on the rear of the printer.
30