2 remove the packaging material from the cassette, Slide the cassette completely into the printer, Chapter – Panasonic KX-P7510 User Manual
Page 21: Setting up the printer, Preparing the printer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter
2
Setting up the Printer
This chapter describes setting up the KX-P7500 Series, connecting it to a PC compatible
computer, and powering on the printer. It also includes instructions on loading paper,
guidelines for using the MP (Multi-Purpose) tray and printing the test page.
The general steps for setting up the printer are:
• “Preparing the printer” O" page 21.
• “Installing the toner cartridge” cr page 22.
• “Loading media” Ct page 24.
• “Connecting the printer” page 30.
• “Connecting the power cord and power on” \y’ page 32.
• “Printing the test page from the operator panel” cr page 32.
Preparing the printer
o
■o
Q}
(Q
3-
o
■o
5‘
(D
During the storage and transport of your printer, adhesive tape is used to block some of
the elements that may move or open unexpectedly and consequently be damaged.
1
2
You must therefore remove all the adhesive tapes.
Slide the cassette out of the printer.
2 Remove the packaging material from the cassette.
Slide the cassette completely into the printer.
21