Panasonic KX-P7510 - Manual (Page 10)

For your safety
General
Warning
• To prevent fire or shock hazard, do not expose this product to rain or any type of
moisture.
Caution
• Do not open covers and do not attempt to repair the unit yourself. Refer servicing to
qualified personnel.
Power source
Warning
• The power source voltage of this unit is listed on the nameplate. Only plug the unit into
an outlet with the proper voltage.
• When you operate this equipment, the outlet should be near the equipment and
accessible.
• To ensure safe operation the AC cord supplied must be inserted into standard three-
prong AC outlet which is effectively grounded (earthed) through the normal wiring.
• The fact that the equipment operates satisfactorily does not imply that the power point
is grounded (earthed) and that the installation is completely safe. For your safety, if in
any doubt about the effective grounding (earthing) of the power point, consult a
qualified electrician.
• If the plug cannot be inserted into the AC outlet, contact a licensed electrician to
replace the outlet with a properly grounded (earthed) one. Do not defeat the purpose of
the grounding (earthing) plug (ex. do not use a conversion plug).
Laser safety
Caution
• This printer utilizes a laser. Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous radiation
exposure.
Ozone release
Warning
• Make sure that the printer is installed in a well ventilated room so as not to increase
density of ozone in the air. Since ozone is heavier than air, it is recommended that air at
floor level be ventilated.
10