Select manual feed as the paper source, Place a sheet of paper in the mp tray, Print your document – Panasonic KX-P7510 User Manual
Page 45: Manual feed printing from mp tray, Both side (duplex) printing, Using the printer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Printer
Manual Feed printing from MP tray
The Manual Feed feature allows you to print on special paper from MP tray such as
envelopes or letterhead. If the Tray menu item is set to Manual, the printer will print only
from MP tray. Manual Feed is selected through the software or printer driver too.
For more information about the source item, see page 44.
1
Select
Manual Feed
as the paper source.
• Set the source item in the properties window to “Manual Feed”.
• You can select “MANUAL’ as the paper source by setting the Tray item of the
operator panel menu.
2
3
4
Place a sheet of paper in the MP tray.
Print your document.
Press
ON LINE/CONTINUE
button when you are prompted.
Both side (Duplex) printing
The printer can automatically print on both sides of paper by setting the Printing Menu or
Finishing tab of KX-P7500 Series PCL6 Driver.
N
otes
• Do not print on both sides of labels, transparencies, envelopes, or paper heavier than
90 g/m^ (24 lbs.).
This may damage the printer and cause a jam.
• You should not expect the same print quality and reliability that you get with one-sided
printing.
B
0)
o
o
a.
T3
5'
3
01 m o m 5! o a c T3 •o 5' 45