Panasonic KX-P 1131 - Manual (Page 39)

Paper Specifications
Printing Area
Fanfold Paper
A
O
O
o
o
o
o
o
o
o
o
o
o
1-0
o
o
p
o
o
o
o
o
o
\
1st character
Printing area
/
Printing area
) o
l o
|0
I?
l o
Paper perforations
lo
1
°
_L q .
I o
|0
iS
l o
1°
o
I a
L"
1 ^ 25.4 mm (1")
1
B 17.8 mm (0.7")
-*-c
c 2 mm (0.08")
■ 1
D 15 mm {0.6")
A: The area near the paper perforations where the
print quality may not be optimum.
B: The minimum distance between the sprockets
and first printable character. {When the left tractor
is set on the left end and the margin is set to 0.)
C: The area from the top edge of the paper to the top
of the first printed character.
D: The area from the bottom edge of the paper where
the print quality may not be optimum.
I D
Single Sheet and Envelope
1st character
Printing area
J l R
B 3 mm (0.12")
C 2 mm (0.08")
D 15 mm (0.6")
B: The minimum distance between the edge of the
paper and first printable character. {When the left
paper guide is set to the 0 position and the margin
is set to 0.)
C: The area from the top edge of the paper to the top
of the first printed character.
D: The position where paper out is detected and
printing may not be optimum. {When printing on
envelopes, do not print on area where edges
overlap. Print quality may not be optimum.)
39