Panasonic KX-P 1131 - Manual (Page 11)

Connecting to a Computer
“I Turnthepoweroff on both the printer
and the computer.
Attach the other end of the interface
cable from your computer.
0 Connect the AC power cord to a
grounded AC socket.
Note:
• If the printer is not going to be used for an
extended period, unplug the power cord.
0)
o
Note:
• Use a shielded cable 1.95 m {6"5") or less in
length for both of parallel and serial.
If you do not already have a interface cable, you
will need to purchase one from your local
computer store or dealer. For details, refer to
“Interfacing” (
bs " P. 40).
• If the cable has a frame ground wire, connect it
to the frame ground terminal.
11