Panasonic KX-P 1131 - Manual (Page 18)

Installing the Software
These Setup Disks (DOS Utilities & Printer Driver for Windows® 3.1,95 & 98 disk, Printer Driver for Windows
NT® 3.5x & 4.0) can only be used in an IBM-PC or a compatible computer with a 3.5'" floppy disk drive.
Before using the Setup Disk, it is recommended that you make a back-up copy and store the original in a safe
place.
The following steps will automatically create a directory called P1131 and copy Control Panel Software
{CPS1131.EXE) and Command Reference utility (CMDREF.EXE) from the DOS Utilities & Printer Driver for
Windows® 3.1,95 & 98 disk to your C Drive. {You can change the directory and drive.)
Note:
• Control Panel Software and Command Reference utility cannot be installed on Windows NT.
DOS
Program Function
Control Panel Software Allows you to view and change the printer settings on the computer screen.
Command Reference utility Allows you to access a detailed explanation of each software command on the
computer screen.
Follow the steps below for installation.
Insert the DOS Utilities & Printer Driver for
Windows® 3.1, 95 & 98 disk into drive A (or
B).
2 Type A: (or B:) and press [ Enter ].
3 Type SETUP and press [Enter).
^ Follow the instructions on your computer
screen.
Windows 3.1
Program Function
Printer Driver A printer driver is the part of the software that allows the software to
communicate with the printer via the interface in use.
Control Panel Software Allows you to view and change the printer settings on the computer screen.
Command Reference
utility
Allows you to access a detailed explanation of each software command on the
computer screen.
Follow the steps below for Installation.
Insert the DOS Utilities & Printer Driver for
Windows® 3.1, 95 & 98 disk into drive A (or
B).
Click I Fil^ from the Program
Manager window.
Click Run... .
4 Type A:\ SETUP (or B:\ SETUP) and then
press [ Enter) (or click
I
OK)).
5 Follow the instructions on your computer
screen.
18