CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 67)

N525 Ethernet Termination Service Unit 3-49
3. At the VLAN Rules Menu, type the number for an item and press . Pressing
cycles through the options for that item, pressing selects the option.
Pressing moves between User Port and Ext Port columns. When connected to a
remote N525 and SBMC is enabled, you can configure options on the remote N525.
a. Drop Untagged Packets?
The N525 will discard all user traffic that does not have a VLAN Tag. Yes discards
packets, No does not.
b. Drop Packets with VLAN Tag not matching VLAN Tag A?
The N525 discards all user traffic that does not have a VLAN Tag matching to VLAN
Tag A (menu item 7). Yes discards packets, No does not.
c. Remove outermost VLAN Tag?
Removes the outer-most VLAN Tag. Takes no action on untagged packets. Yes
removes outermost tag, No does not.
d. Add VLAN Tag B to Untagged Packets only?
Adds VLAN Tag B (item 8 below) to all untagged packets. Yes add tags, No does
not.
e. Add VLAN tag C to tagged packets only?
Adds VLAN Tag C (item 9 below) to all untagged packets. Yes add tags, No does
not.
f. Add VLAN Tag C to Tagged Packets only using P-Bits of outermost VLAN tag?
Adds VLAN Tag B (item 8 below) to all untagged packets, using the Priority Bit
setting of the user’s packet (if tagged), overriding the VLAN Tag C’s Priority Bit
setting. Yes add tags with user P-Bit setting, No does not.
g. Tag A VLAN ID (0-4095)
Sets VLAN ID for Tag A. ID setting of 0 – 4095 are valid.
h. Tag B VLAN ID (0-4095)
Sets VLAN ID for Tag B. ID setting of 0 – 4095 are valid.
Priority (0 - 7)
Sets P-Bit of VLAN Tag B. Values of 0-7 are Valid.
i. Tag C VLAN ID (0-4095)
Sets VLAN ID for Tag C. ID setting of 0 – 4095 are valid.
Priority (0 - 7)
Sets P-Bit of VLAN Tag C. Values of 0-7 are Valid.
4. To return to the Main Menu, press .