CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 28)

3-10 N525 Ethernet Termination Service Unit
Port Configuration
This screen has several submenus. The following describe the submenus:
1. Hardware Information
Displays N525 hardware information, including the installed User and
Extension port modules.
2. Functional Configuration
Configures and displays parameters for an individual port
3. VLAN Configuration
The VLAN Configuration screen displays and configures VLAN parameters of
the N525.
4. Port Filters
This lets you set filters on the User and Extension ports to control traffic
coming out of these specific ports depending on the packet type.
Layer 2 Statistics
Displays current Layer two Statistics
RMON Group 1 Statistics
Short for Remote Monitoring Specification (RMON). This screen displays current
RMON statistics.
System Alarms
Displays current conditions for local and remote alarms
System Log
Displays all system events
Utilities
Setup and display basic information. Below are the sub menus:
Set Date & Time
An accurate date and time in the N525 assures accuracy for events listed in the
System Log and for traps and alarms sent to the system administrator. You can
choose either manual setting of the date and time or configure automatic updating of
the clock using SNTP. Method you use depends on the N525’s access SNTP Server
and your need for accuracy.
Reset Configuration to Default
This allows you to set all parameters within the N525 to be set to factory defaults.
Change Password