CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 66)

3-48 N525 Ethernet Termination Service Unit
Configuring VLAN Rules, Priority, and Translation
The VLAN Configuration Menu provide options to configure user traffic VLAN tagging
parameters on User and Extension ports. To configure VLAN tags, translation, and priority,
follow these steps:
1. From the Main Menu type [ 3 ], "Port Information," and press . At the Port Information
Menu, type [ 2 ], "Port Configuration," and press . At the Port Configuration Menu,
type [ 3 ], "VLAN Configuration and press .
2. To configure VLAN Tagging rules, type [ 1 ], "VLAN Rules," and press ."
-------------------------------VLAN CONFIGURATION-------------------------------
1) VLAN Rules
2) VLAN ID Translation Table
3) P-Bit Translation Tables
Select [1-3]:
------------------------------------Messages------------------------------------
----------------------------------VLAN RULES------------------------------------
Local Local Remote
User Port Ext Port Offline
1) Drop Untagged Packets? No No
2) Drop Packets with VLAN Tag
not matching VLAN Tag A? No No
3) Remove outermost VLAN Tag? No No
4) Add VLAN Tag B to Untagged
Packets only? No No
5) Add VLAN Tag C to Tagged
Packets only? No No
6) Add VLAN Tag C to Tagged
Packets only using P-Bits
of outermost VLAN tag? No No
7) Tag A VLAN ID (0 - 4095) 0 0
8) Tag B VLAN ID (0 - 4095) 0 0
Priority (0 - 7) 0 0
9) Tag C VLAN ID (0 - 4095) 0 0
Priority (0 - 7) 0 0
Select [1-9]:
------------------------------------Messages------------------------------------