Command 105 baud rate selection – Vernier LabPro User Manual
Page 57
Revision Date: 08/02/02
LabPro Technical Manual
57
Command 105
Baud Rate Selection
New in firmware version 6.06200, this command controls the baud rate of the RS-232 serial port. Only
hard reset or {105,38} returns the baud rate to 38400. This command has no effect on calculators.
Syntax: {105,baudrate}
Parameter List:
pwrctl
– determines how power is used in LabPro
baudrate
value
Description
38
38,400 baud
115
115,200 baud.
Return values: An “OK” is returned when this command is received and just before changing
timers.
Example 1: Set the baud rate for the LabPro first to 115,200 baud then back to 38400 baud.
Host
LabPro
s{105,115}
OK
s{105,38}
OK