Vernier LabPro - Manual (Page 44)

Revision Date: 08/02/02
LabPro Technical Manual 44
Command 6 System Setup
This command can be used to turn sound on or off, set an ID number for LabPro, and select a filter to be
applied to data.
Syntax: {6,syssetup[, parm]}
Parameter List:
syssetup
– indicates which channel on which this command operates. The possible values are
syssetup Description
0 Abort Sampling
1 * Undefined *
2 Abort Sampling
3 Turn sound off
4 Turn sound on
5 Sets an ID number for LabPro
6 Selects a filter to be applied to data
parm – If syssetup has the value of 5, parm may be any floating point number between -10 38 to +
10 38 which sets the ID number for LabPro. This ID is used to identify a specific LabPro when
multiple units are linked together or attached to a single computer. If syssetup has the value
of 6, parm may have any value from zero (0) to six (6). Parm is the number of the filter to be
applied as specified by Command 3.
Return values: No information is returned.
Example 1: Turn off LabPro sound.
Computer
Calculator
S{6,3} :Send({6,3})