beautypg.com

Installation guidelines, Ludlow – Waterworks Ludlow Handshower On Bar with Metal Handle User Manual

Page 2

background image


PRODUCT SUPPORT 800.927.2120 8am - 6pm EST

LUDLOW

Handshower

INSTALLATION GUIDELINES

Page 2 of 2


11.1.2013

These guidelines have been prepared for the professional contractor to aid in the installation of:
LUDLOW HANDSHOWER ON HOOK (STYLE# LDHS01) & HANDSHOWER ON BAR (STYLE#
LDHS10) All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.
SEE SERVICE PART DOCUMENT FOR PART ORDERING, AVAILABLE ON WATERWORKS.COM

¾ During installation make sure to rotate the

ESCUTCHEON to orient the NOTCH out of sight. The
NOTCH is for easy access.


Figure 2

ANCHOR

ESCUTCHEON

ACCESSORY SCREW

WALL SCREW

HANDSHOWER BAR

WALL MOUNT PLATE

FINISHED WALL

ACCESSORY POST

HANDSHOWER

SLIDER

24" ON CENTER

Figure 3

NOTCH

ESCUTCHEON

ACCESSORY

POST

WALL

PLATE

HANDSHOWER INSTALLATION:

9. Connect the hex end of the HANDSHOWER HOSE to

the bottom of the SUPPLY ELBOW. Connect the
conical end of the handshower hose to the bottom
of the HANDSHOWER.

10. Place HANDSHOWER into the HOOK on the SUPPLY

ELBOW (LDHS01) or on the HANDSHOWER SLIDER
(LDHS10).

HANDSHOWER SLIDER OPERATION (LDHS10 only):

¾ See Figure 4 for Steps 11 & 12.

11. To adjust the HANDSHOWER SLIDER, loosen the

lever and reposition.

12. To pivot the HANDSHOWER HOOK pull the spring

loaded hook and turn. The hook operates like a
spring loaded ratchet.

Figure 4

PULL AND TURN TO

PIVOT HANDSHOWER

HANDSHOWER

SLIDER HOOK

ROTATE LEVER

TO LOOSEN SLIDER

HANDSHOWER
BAR

INSPECT THE INSTALLATION:

13. Remove the handshower from the hose. Turn on the

wall valve/diverter (sold separately) to flush out any
debris in the supply line.

14. Inspect all connections for leaks.

15. Turn off supply and re-attach the handshower to the

hose.

¾ Note: The FLOW REGULATING CHECK VALVE is

located in the inlet of the HANDSHOWER and the
CHECK VALVE is located in the outlet of the
SUPPLY ELBOW.

¾ If further assistance is required, please contact

Product Support at 1-800-927-2120 (8am-6pm EST).

¾ See service part document for parts ordering,

available on WATERWORKS.COM.


This manual is related to the following products: