Waterworks Universal Modern One Hole High Profile Kitchen Faucet, Metal Lever Handles and Spray - Manual (Page 2)

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST
UNIVERSAL
One Hole Modern Kitchen Mixer with Spray
INSTALLATION GUIDELINES
Page 2 of 2 12.21.2012
These guidelines have been prepared for the professional contractor to aid in the installation of:
UNIVERSAL ONE HOLE KITCHEN MIXER AND SPRAY (STYLE # UNKM10).
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.
SEE SERVICE PART DOCUMENT FOR PART ORDERING, AVAILABLE ON WATERWORKS.COM
SIDE SPRAY INSTALLATION:
¾ See Figure 2 & Figure 3. for Steps 6-10.
6. Remove the nut, metal washer and rubber washer
from the bottom of the metal sleeve.
7. Insert the metal sleeve along with the escutcheon
into the hole in the deck, making sure the rubber
washer is between the escutcheon and the deck.
8. Re-attach the rubber washer, metal washer, and nut
to the metal sleeve from under the deck.
9. Pass the hex end of the hose through the threaded
sleeve and connect it to the check valve housing,
which is located on the diverter assembly, with the
rubber washer in between.
10. Connect the conical end of the hose to the side
spray with the rubber washer in between.
Figure - 02
RUBBER WASHER
SIDE SPRAY HOSE
ESCUTCHEON
RUBBER WASHER
METAL SLEEVE
METAL WASHER
NUT
RUBBER WASHER
RUBBER WASHER
CHECK VALVE HOUSING
SIDE SPRAY
Figure - 03
RUBBER WASHER
CHECK VALVE HOUSING
RETURN HOSE TO
1
2
" DIVERTER PORT
SIDE SPRAY HOSE
OUTLET HOSE TO
3
8
" DIVERTER PORT
*NOTE: HOSES SHOWN CUT FOR DETAIL PURPOSES
INSPECT THE INSTALLATION:
11. Connect the hot and cold inlet hoses to supply
valves (Sold Separately).
12. Remove the flow restricting aerator with the tool
provided, then carefully open the hot and cold
valves to flush out any debris in the supply lines.
(See Figure - 01).
13. Inspect all connections for leaks.
14. Re-install the flow restricting aerator making sure
the washer is in place.
15. Make sure the hoses are tight and are not
pinched/kinked.
* Putty contains oils and can cause permanent
discoloration on certain materials such as marble,
granite and any porous surface.
¾ If further assistance is required, please contact
Product Support at 1-800-927-2120 (8am-6pm EST).
¾ See service part document for parts ordering,
available on WATERWORKS.COM.