Installation guidelines – Waterworks Easton Classic Low Profile Three Hole Wall Mounted Lavatory Faucet with Oak Lever Handles User Manual
Page 3
Installation Guidelines
W A T E R W O R K S
®
Easton Wall Mounted Lavatory Faucet
2/06
INSPECT THE INSTALLATION
29. Remove the flow restrictor assembly (8d,8e) from
the spout using the tool (9) provided. Carefully
open the hot and cold valves to flush out any
debris in the supply lines.
30. Inspect all connections for leaks. Reinstall the flow
restrictor assembly.
If further assistance is required, please contact
Product Support at 1-800-927-2120 (8am-7pm
EST)
28. Attach the tail piece using the gasket (17) provided.
Do NOT over-tighten the tailpiece nut (16); hand
tight is adequate.
These guidelines have been prepared for the professional contractor to aid in the installation of:
EASTON WALL MOUNTED LAVATORY FAUCET WITH CROSS HANDLES
(EALS41 & GUSV27R) & LEVER HANDLES (EALS42, 43, 44, 45 & GUSV25R) All
dimensions are based on original specification and are subject to change and variation. Please consult
your Design Associate for current specifications.