Rice Lake TransAct 2.0 - Manual (Page 75)

74 Weigh
Example: Certain trucks used by D&D Disposal Co., Inc. will
always have a container with them. You can set up the trucks
bringing containers to the site to require a container in the tare
table. To setup Tare 1 items to require Tare 2 or Tare 3 items, see
Section 7.1.4.
Click Close Ticket and Print to print the ticket and store the transaction
information in the TransAct database.
Click Close Ticket (Don’t Print) to store the transaction information
without printing the ticket.
Click Cancel to return to the Transaction Detail table.
Click OK to return to the Transaction Detail table. You can then select the
item required, Tare2 or Tare3, and click the Print Ticket button to complete
the transaction.
8.3.2 Tares Used as the Weight In
Transact uses a stored tare as a Weight In when the default Material
Direction is set to Outgoing in the Options table.
Example: An aggregate operation with outgoing rock or gravel
uses stored tares as Weight In to calculate net weight.
Use the single down arrows to the right of the tare fields to display and select
available tares. Click on the tare to use. The total weight of all tares selected
(truck, container, and pup trailer) is displayed in the Weight In box. The tare
weight is automatically subtracted from the weight Out and the adjusted
weight appears in the Net weight box.