Rice Lake TransAct 2.0 - Manual (Page 60)

59 Weigh
A motion indicator in the top left corner of the display window informs you
when the scale is in motion. You cannot continue with the transaction until
the motion indicator clears from the display.
Weight Display Window in Simulation Mode
When you connect a scale to the computer, TransAct reads the weight
supplied by the scale indicator and displays the weight in the display
window. The unit of measure (lb-pound or kg-kilogram) used by the scale
indicator also appears in the display window.
8.1.3 Display Window
The display window shows the scale weight. This window will look
different depending on the type of scale you selected and whether you
selected dual scale mode. See Section 7.7.3 for more information.
When the scale port is in MANUAL mode, the display window is inactive.
You must manually enter weights in the Weight In/Weight Out boxes of the
Transaction Detail table.
When the scale port is in SIM mode, arrows for increasing and decreasing
a truck weight appear next to the display window to simulate a scale action.
These buttons increase or decrease simulated truck weights in increments
of 3000 pounds.
Once motion stops, you can lock the scale weight to help speed the weighing
process. To lock the weight, double click in the lower left corner of the
display window. Once you lock the weight, the truck can continue into the
site while you modify information about the transaction before storing the
ticket.