Rice Lake TransAct 2.0 - Manual (Page 73)

72 Weigh
The Ticket Number, date and time, and Customer Account are locked fields
once the transaction begins.
If you selected an incorrect customer account, click Cancel to reset the
transaction. Select the appropriate Bill-To Account if different from the
Customer Account.
When you select a customer account, TransAct enables any tare fields the
account uses and disables any unused tare fields.
For example, landfill operations are mostly incoming; aggregate sand and
gravel operations are mostly outgoing.
Select No Tare to record tare IDs but ignore tare weights. When you select
No Tare, TransAct treats the transaction as a Weigh In/Weigh Out transaction.
TransAct uses Tare IDs to identify the transaction.
8.3.1 Stored Tares Used as the Weight Out
TransAct uses a tare weight as a Weight Out when the default Refuse
Direction is set to Incoming in the Weighing Options table.
Example: A landfill operation has incoming refuse; therefore, TransAct
uses stored tares to calculate the net weight of loads.
Use the single down arrows to the right of the tare fields to display and select
(click on) available tares. The total weight of all tares selected appears in the
weight Out box. TransAct automatically subtracts the tare weight from the
Weight In and the adjusted weight appears in the Net weight box.