Rice Lake TransAct 2.0 - Manual (Page 113)

112 Appendix
when you click the Notes… button in the Weigh form.
12.2.4 [Weigh Options]
Use the [Weigh Options] section to change the default Unit of Measure
(UOM). UOM defines the unit of measure to which TransAct converts the
scale value. This value appears as the Ticket Weight on the Weigh form.
Possible values are:
Pounds, Yards, Unit Count, Kilograms,
Tons, or Metric Tons. For example, if you would like to print tons on
your tickets, you need to change the UOM in the .ini file to read Tons .
If you need to activate Axle Weighing, add the following command line to
this section.
AxleWeighing=On
You can change all of the other information in the [Weigh Options]
section by clicking the Options… button in the Weigh form while running
the TransAct program. TransAct recommends using the Weighing Options
window for all other changes.
12.2.5 [Tares]
Use the [Tares] section to activate up to three tare options. Some or all of
the tares were activated when you install TransAct. Active tares appear in
TransAct under Admin… | Customer Accounting.
To activate a tare button, position the cursor after the equal sign and type the
name for the button.
Remember: Type the name in exactly as you would like
to see it displayed in TransAct.
Existing Name: Tare3=
New Name: Tare3=Pup Trailer
To deactivate a tare, position the cursor after the existing name and press the
Backspace key on the keyboard until nothing is displayed after the = sign.
Existing Name: Tare2=Container
New Name: Tare2=