Rice Lake TransAct 1.0 - Manual (Page 97)

9 3 Weighing
Example: Certain trucks used by D&D Disposal Co., Inc. will
always have a container with them. The trucks bringing contain-
ers to the site can be set up to require a container in the tare
table. To setup Tare 1 items to require Tare 2 or Tare 3 items,
refer to Setting up Customer Accounts in the Admin section.
Click on OK to return to the Transaction Detail table, where you can
select the item required, Tare2 or Tare3, and click on the Print Ticket
button to complete the transaction.
Stored Tares Used as the Weight In
A stored tare is used as a Weight In when the default Material Direc-
tion is set to Outgoing in the Options table.
Example: An aggregate operation with outgoing rock or gravel uses
stored tares as Weight In to calculate net weight.
Use the single down arrows to the right of the tare fields to display and
select available tares. Click on the tare to be used. The total weight of
all tares selected (truck, container, and pup trailer) is displayed in the
Weight In box. The tare weight is automatically subtracted from the
Weight Out and the adjusted weight appears in the Net Weight box.
Tare Weight Applied to Outgoing Material Leaving a Site