Rice Lake TransAct 1.0 - Manual (Page 71)

6 7 Setting Up TransAct
Correctly-Interfaced Scale Test Output
If the scale is correctly interfaced with the computer, you should be
able to read the scale weight in the diagonal print out area. The correct
weight should also be displayed in the Weight box at the bottom of the
window.
Click Done to return to the Set Scale Port Parameters window.
Click Pause to stop the window from scrolling.
If the test screen is blank or shows something other then the above
picture, the computers settings are not correct for the scale indicator.
Ticket Printer
This section is used to define the type of ticket printer connected to the
computer. You will need to know specific information about the ticket
printer you are using to properly interface with TransAct .
To set up the ticket printer, select Preferences from the Admin... pull-
down menu. Select Ticket Printer Port.