Rice Lake SURVIVOR LaserLight Series Stop/Go Remote Displays - Installation & Operation Manual - Manual (Page 32)

28 LaserLight Installation and Operation Manual
5.0 Appendix
5.1 Error Messages
The LaserLight remote display provides several error messages. When an error occurs, the message is shown on
the display.
Some of the actual error messages displayed by the remote display are cryptic and are represented in Table
5-1 as closely as possible with plain text.
Table 5-1 lists error messages shown by the LaserLight remote display and their meaning.
7-Segment
Display
Message
Matrix Display
Message
8-Character
Matrix Display
Message
12-Character Meaning Cause
LError LError Learn Error Auto Learn error Auto Learn failed
WError WError Write Error Indicator code Write error. Could not save menu settings to the serial
EEPROM
Reset Reset Reset Config Invalid settings Invalid settings upon power up. All settings reset to their
default state.
RError RError Range Error Range Error When the Rice Lake format goes over or under range.
Table 5-1. Error Messages
Note