Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 53)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 47
54) 【Printable area set】《Gs W n1 n2》
Code : [1D] h + [57] h + n1 + n2 ※ [03≤n1≤50] h
Set left margin and printable area ※ [03≤n2≤4D] h
* n1 = left margin (mm)
* n2 = printable area(mm)
* right marging(mm) = 80 – (left margin + printable area )
* please refer to [printable area] for the details.
55) 【maximum printing speed set】《GS S n》
Code: [1D] h + [53] h + n ※ [00≤n≤04] h
Set maximum printing speed at storage print.
* “n” has following meaning
n(hex) Maximum printing speed n(hex) Maximum printing speed
00 Max. 200mm/sec 03 Max. 100mm/sec
01 Max. 150mm/sec 04 Max. 75mm/sec
02 Max. 125mm/sec
* Default of n is [00] h
56) 【butch set of Japanese Kanji print mode】《FS ! n》
Code：〔1C〕h＋〔21〕h＋n ※〔00 ≤n≤FF〕h
Set Japanese Kanji overall print mode set.
* “n” has the following meaning.
Value
Bit Function
0 1
0 undefined
1 undefined
2 Double width Reset Set
3 Double height Reset Set
4 Undefined
5 Undefined
6 Undefined
7 Underline Reset Set
* If double height and double width are set at the same time ,quadruple character will
be formed.
* All of the printed characters will be underlined except for the 90 ° clockwise rotated
characters and spaces created by horizontal tab.
* Underline width is determined by the value set in 【Kanji Underline set/reset]】.
The default value is “1”.
* Different sizes of character mixed such as normal size, double height, double width
and quadruple can be printed.
* Combined print with ANK Character is available.
* Default of n is〔00〕h.
57) ▲【Japanese Kainji mode set】《FS &》
* Effective only when Japanese font and Korean font selected.
Code：〔1C〕h＋〔26〕h
Set Japanese Kanji mode
* It is not effective when selected Shift JIS of Japanese Kanji.
* Default is the reset of Japanese Kanji mode.