Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 17)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 11
2.6 Power Supply Specifications
1) Power supply input connector
The printer should be connected with the specific AC adaptor.
Connector on printer side: TCS7960-5320177 Hoshiden or equivalent
Connector on Adaptor side: TCP8927-631177 Hoshiden or equivalent
2) Power Supply Voltage：DC24V±5%
3) Current Consumption ※１※２
Consumption Current
2-inch 3-inch Power supply
+24V±5% +24V±5%
Standby 約 80mA(typ)
Print avarage 25% Max. approx. 3.5A
Print avarage 100% Max. approx. 14A
Condition：Optimized drive print、dual partitioning print
*1 A power supply with enough capacity is required in order to secure a good printing
quality. Depending on the printing contents, the current may be big at the peak time.
*2 If power supply cable is excessively long, the operation may become unstable. Cable
should be made as short as possible. If not available, connect cables near the printer
and place an electrolysis condenser of 2200µ between power supply and ground.
Voltage resistance should be higher than 35V.
No function
1 +24V
2 GND
3 N.C
shell FG
Connector Fig.
3 1
2