Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 10)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 4
No. Specifications 2 inch (tentative) 3 inch
4 Print mode Line mode
Page mode (under development)
5 Barcode spec 1:1D Symbology UPC-A
UPC-E
JAN-13(EAN-13)
JAN-8(EAN-8)
CODE39
ITF
CODABAR
CODE128
6 inerface 1:Serial (dual tipe) RS232C compliance
2:USB(dual U type) V2.0 FULL SPEED compliance
7 Autocutter 1:cut mode Full/Partial cut
* by command selection
8 Receive buffer Approx. 15K byte
9 Operation ALARM LED OUT
Switch input FEED Switch Input
Reset Switch
10 Appearance 1:Dimensions 106(W) x 150(D) x 127(W) x 150(D) x
Without connector&roll paper 75(H) mm 75(H) mm
2:Weight Approx. 640g Approx. 750g
Without roll paper
3:Mounting note *4 Horizetal Position Horizental Position
*3 Paper roll should be wind tightly. If not, can’t detect corectly.
Can’t detect near-end when you use wider core diameter than value set of near-end due to
reflective type photo sensor.
*4 This printer should be installed horizontally.