Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 29)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 23
4.6 Operation panel
The printer is ready for the following operations;
1) ALARM (red) ［alarm lamp］
Will turn on (or blink) when printer is on error status.
Will blink/ turn on/ turn off when rewriting Flash Rom
※The pattern of the ALARM indication is in the following chart.
Display pattern Printer status
Priority
(9:High ~ 1:Low)
１
０
Normal Status
Print(receive) ready
1
No paper 3 １
０ Thermal head cover open 4
１
0.1secc
０
0.1sec
F/W write mode 9
１ 0.2secc
０
0.2sec
Paper near empty 2
１
2.2sec
０
2.2sec
Head temperature over 70℃
Or, Wrong head connection
5
Auto cutter error 6
Paper detect error 7
１ 0.2sec
０
0.2sec 1.0sec
Presenter clamp
( detects remaining paper)
8
2) FEED Switch ［Paper feed switch］
Switch to feed paper in the forward direction
Also, used in self-printing .
3) Reset SW
Reset SW is placed on the right side of FEED SW, and you cannot push Reset SW
with your finger to avoid misoperation. (Push Reset SW lightly with ballpoint pen etc,
and release.)
By activating Reset SW, the printer is initialized at the time of power on.
* Reset Switch will be implemented on production February 2007.