Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 13)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 7
2.3 Print Area
1) Name of Symbols
Symbol Name
A The number of dot for Printing
B Left Margin
C Area of Printing
D Right Margin
E Paper Width
2) Paper Width and Example of Printing Area Setting
A(dot) B(±1mm) C(±0.2mm) D(±1mm) E(-1mm)
416 3 52 3 58 2inch
（ tentative） 432 3 54 3 60
472 3 59 3 65
560 3 70 3 76
3inch
576 4 72 4 80
In case the margin on Left and Right is not enough, printing is run off due to directional
bias on paper. (We recommended more than 3mm) Printing Area can be changed by
command.
3) Factory Setting
Factory setting as follows:
A(dot) B(±1mm) C(±0.2mm) D(±1mm) E(-1mm)
２ inch
（ tentative）
416 3 52 3 58
３ inch 576 4 72 4 80
1dot 2dot
A dot
0.125mm
B C D
E
Feed direction
Print Area