Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 47)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 41
33) 【Compulsary Feed】《ESC r n》
※ This command is effective only when you use Presenter(NPT-301)
Code：〔1B〕h＋〔72〕h＋n ※〔 00≤n≤01〕h
(Compulsary Feed) is used for compulsary feed / (All Feed) with status of unremoval of
paper in a certain time running after (Clamp Feed).
* This command let motor normal or reverse rotate the motor until feed all paper.
* n has the following meanings.
n(hex) Motor
00 Forward Rotation
01 Reverse Rotation
34) 【Printer information transitting】《ESC s n》
Code：〔1B〕h＋〔73〕h＋n
Conduct printer information transmitting.
* Details of n and return information mentioned as the following;
n(hex)
Category of Printer
Information
Return Data format Return data length
02 Model info.
Variable length string
(terminal NULL=00h) Max32Byte
03 F/W version info. Fixed length string ８ Byte
04 Boot version info. Fixed length string ８ Byte
05 SW setting info. Fix Length Hex data ４ Byte
Return Transimit Format
〔 FF〕h ＋ n(※1) ＋return data
※ 1 n is designated by command.
35) ▲【Select Character code table】《ESC t n》
※ Effective only when Japanese and Korean selected
Code：〔1B〕h＋〔74〕h＋n ※〔 00≤n≤06〕h
Conduct selection of Character code table
* n has the following meaning.
n(hex) Font Table
00 International Code page
01 Japanese Code page
02 Code Page 858
03 Code Page 1250
04 Code Page 1251
05 Code Page 1252
06 Code Page 1254
* Default value of n is〔01〕h
36) 【Printer status transmit】《ESC v》
Code：〔1B〕h＋〔76〕h
Transmit current printer status
* Status transmit is one byte. Please refer to the error detection for the details.
* Transmit one byte after confirmation of receivable on host (CTS singnalon space status)
* When host is unreceivable (CTS singnal at Mark status), printer is waiting until host is
receivable.
* This command is effective only for Serial Interface.
* Command should be issued before transmit of print data.
(Stored on internal receipt input buffer, run on sequential)
* Receivable except for internal receive input buffer is full.