Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 11)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 5
2.2 Paper Specifictions
1) Printermechanism
2 inch (tentative) 3 inch
Paper wide 58/60 -1 mm 65/76/80 -1 mm
Paper thickness 65～150µm
・ Do not change narrow paper to wide paper on using.（In case you use narrower paper
than wide of Thermal head, the uncovered part by paper on thermal head grazes
directly with palaten roller and the thermal head could be destoried.）
・ In case you use paper wide 60, 65 and 76mm, please contact us. (Settnng of paper wide
for printers should be at Factory.
①
Thermal Roll Paper Specifications.
a) External Dimensions of Thermal Roll Paper
max. external diameter：φ83mm
※ Now we’d prepare paper holder PH-8L only. (uptoφ83mm)
When you use paper withφ84 and more, please contact us.
（ In the case of using paper with φ100 and more, we adapt axis-suppot and
need additional cushion device.）
b) Paper Core Specificaitons
Paper thickness Inner core diameter Outer core diameter
65～85µm φ12.0mm φ18.0mm
100～150µm φ25.4mm φ33.4mm
※ Width of paper core should be same as width of width of roll paper.
c) Conditions of using thermal paper
You should keep stricktly the following conditions;
・ Do not stick end of paper with glue and scotch tape.
・ The core of paper roll should not be deformed.
・ The core of paper should not be sticked out over the side of paper roll.
・ Don’t keep paper rolls on condition of heat and humidity
2) Paper Holder
① roll paper
Name Paper wide
External
diameter
Paper core Near Empty
PH-8L 80 -1 mm φ83mm
Innerφ12.0mm
Outterφ18.0mm
φ22.0±2mm
PH-10
* 1
－ φ83mm
Innerφ12.0mm
Outterφ18.0mm
φ22.0±2mm
* 1 Now PH-10 is under design for NP-2511.
By attaching the addional part, you can extend to Inner coreφ25.4mm、
Outer coreφ33.4mm.（in this case, we are confirming Near Empty.）