Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 48)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 42
37) 【Inverted Character Set・Reset】《ESC { n》
Code：〔1B〕h＋〔7B〕h＋n ※〔 00≤n≤FF〕h
Set or Reset Inverted Character function.
* n is only valid for LSB (b0)
*LSB(b0) has the following meaning.
b0 Descriptions
0 Resets inverted character
1 Sets interted character
* The command is only valid when it is assigned at the beginning of a line.
* Default Value of n is〔00〕h.
38) 【Select division drive】《GS % n》
Code：〔1D〕h＋〔25〕h＋n ※〔 01≤n≤03〕h
Select division drive
* n has the following meaning;
n(hex) divisions
01 Fix without divisions
02 Fix in two division
03 Optimization
・ Default value of n is〔03〕h.
・ Not divide out of area
39) 【Black and white reverse print set and reset】《GS B n》
Code：〔1D〕h＋〔42〕＋n ※〔 00≤n≤FF〕h
Sets and resets black and white reverse print.
* n is only valid for LSB(b0).
* LSB(b0) has the following meanings;
b0 Functions
0 Reset black and white reverse print
1 Set Black and White reverse print
* The built-in characters and the downloaded can be reverse printed.
* The right side space of character set by [Set right space of a character] is also
included for reverse print.
However, it does not cover the skipped space made by bit
image, download bit image, NV bit image, barcode, HRI characters, horizontal tab,
specify absolute position, specify relative position.
* It does not include the space between the lines.
* Reverse print has a priority over “underline specified”. If a character is reversed, the
character is not underlined. However, the underline setting remains effective.
* If “highlight” or “double strike” is set on the reverse print, the print may result in
damages.
* The default value of “n” is [00] h.