Mercedes-Benz S-Class 2014 COMAND Manual - Manual (Page 67)

previously selected display as soon as you
shift out of reverse gear.
You can find further information about the
rear view camera in the vehicle Operator's
Manual.
X Switch on COMAND (
Y
page 23).
X Press the Ø button.
The vehicle menu is displayed.
X Slide VÆ the controller.
X To select System Settings System Settings : turn and
press the controller.
X Select Rear View Camera Rear View Camera .
The rear view camera menu appears.
X Select Activation by R gear Activation by R gear .
The function is switched on O or off ª,
depending on the previous status.
When you start the vehicle and engage
reverse gear, the camera cover opens
automatically if the function is activated.
The area behind the vehicle is shown in the
COMAND display with guide lines (see the
vehicle Operator's Manual).
The rear view camera can detect moving and
stationary objects. If, for example, a
pedestrian or another vehicle is detected,
these objects are marked with bars. The
system is only able to detect and mark
stationary objects when your vehicle is
moving. By contrast, stationary objects will
always be detected and marked.
Switching object detection on/off
X To select Object Detection Object Detection in the rear
view camera menu: turn and press the
controller.
The function is switched on O or off ª,
depending on the previous status.
Opening the camera cover for cleaning
X To select Open Camera Cover Open Camera Cover in the rear
view camera menu: turn and press the
controller.
The Please Please Wait... Wait... message appears for
approximately three seconds.
The camera cover opens. The camera cover
closes automatically when you lock the
vehicle or pull away.
Rear view camera
65
Vehicle
funct
ions