System settings, Reset function – Mercedes-Benz S-Class 2014 COMAND Manual User Manual
Page 50
X
To select
System Settings
System Settings
: slide V¬
and press the controller.
A menu appears.
X
To select
Data Import/Export
Data Import/Export
: turn and
press the controller.
X
Select
Import Data
Import Data
or
Export Data
Export Data
.
i
If you import data such as address data,
the existing data on COMAND is
overwritten. You will see a message to this
effect. COMAND is restarted after the data
import.
If PIN protection is activated, a PIN prompt
appears when you select
Export Data
Export Data
.
X
To enter the PIN: turn the controller and
press ¬.
PIN protection is deactivated.
X
To select
Memory Card
Memory Card
,
USB 1
USB 1
or
USB 2
USB 2
:
turn and press the controller.
This function exports all the data to the
selected disc.
A window appears with the message that
the data has been exported.
i
You can export address data, bookmarks,
system settings that you have made and
radio station lists, for example.
Personal music files in the MEDIA
REGISTER cannot be saved and imported
again using this function.
Mercedes-Benz is not liable for any loss of
data.
Reset function
You can completely reset COMAND to the
factory settings. Amongst other things, this
will delete all personal COMAND data. This
includes the station presets, entries in the
destination memory and in the list of previous
destinations in the navigation system and
address book entries. In addition, an
activated PIN protection, which you have
used to protect your data against unwanted
export, will be deactivated. Resetting is
recommended before selling or transferring
ownership of your vehicle, for example.
Data on the internal hard drive, e.g. music
files in the MEDIA REGISTER, will be deleted.
You can also delete music files from the
MEDIA REGISTER using the "Delete all media
files" function (
Y
page 206).
Mercedes-Benz is not liable for any loss of
data.
X
Press the Ø button.
The Vehicle menu appears.
X
To select
System Settings
System Settings
: slide V¬,
turn and press the controller.
A menu appears.
X
To select
Reset
Reset
: turn the controller and
press to confirm.
A prompt appears asking whether you wish
to reset.
X
Select
Yes
Yes
or
No
No
.
If you select
No
No
, the process will be
canceled.
If you select
Yes
Yes
, a prompt will appear again
asking whether you really wish to reset.
X
Select
Yes
Yes
or
No
No
.
If you select
Yes
Yes
, a message will be shown.
COMAND is reset to the factory settings
and restarted.
If you select
No
No
, the process will be
canceled.
48
Reset function
System
settings