Mercedes-Benz S-Class 2014 COMAND Manual - Manual (Page 49)

Importing/exporting data
General notes
! Never remove the stick or card when
writing data to the USB stick or the memory
card. You may otherwise lose data.
Using this function, you can:
R transfer your personal COMAND data from
one system/vehicle to another.
R make a backup copy of your personal data
(export data) and load it again (import
data).
R protect your data from unwanted export by
activating a pin prompt (presetting:
deactivated ª).
You can either use an SD memory card or a
USB storage device (e.g. a USB stick) as
temporary storage.
Activating/deactivating PIN
protection
X Press the Ø button.
The Vehicle menu appears.
X To select System Settings System Settings : slide V¬,
turn and press the controller.
A menu appears.
X To select Data Import/Export Data Import/Export : turn and
press the controller.
X Select Activate PIN Protection Activate PIN Protection .
Activate O or deactivate ª PIN
protection. When activating PIN protection,
you will be prompted to enter a PIN.
X
To enter the 4-digit PIN and select ¬:
turn and press the controller.
You will be prompted to enter the PIN
again.
X Enter the PIN again and select ¬.
The PIN prompt now protects your personal
data from unwanted export.
i If you deactivate your PIN protection, you
will first be prompted to enter your PIN. If
you have forgotten your PIN, an authorized
Mercedes-Benz Center can deactivate your
PIN protection for you. Alternatively, you
can deactivate PIN protection by resetting
your personal COMAND data
(
Y
page 48).
Importing/exporting data
X Insert the SD memory card (
Y
page 195).
or
X
Connect a USB device (e.g. a USB memory
stick) (
Y
page 195).
X Press the Ø button.
The Vehicle menu appears.
Importing/exporting data
47
Sys
tem
set
tings