At a glance, Splitview – Mercedes-Benz S-Class 2014 COMAND Manual User Manual
Page 28
R
The multifunction steering wheel can only
be used for functions which relate to the
driver's side.
R
The driver can lock/unlock the other
screens (override feature) (
Y
page 63).
Switching SPLITVIEW on/off
From the driver's side
:
SPLITVIEW switched on
;
To switch SPLITVIEW on/off
Activating
X
Press the Ø button.
The Vehicle menu appears.
X
Slide V¬ the controller.
The menu bar is shown.
X
To select ù
On
On
: turn and press the
controller.
SPLITVIEW symbol : appears. The ù
display changes to
Off
Off
;.
The front passenger sees the display of the
function last activated. If the switch-on
time was longer than 30 minutes
previously, the display from the driver's
side is shown.
Deactivating
X
To select ù
Off
Off
in the menu bar: turn
and press the controller.
The ù display changes to
On
On
.
ù is hidden in the status bar.
Locking/unlocking SPLITVIEW:
X
Proceed as described under "Locking/
unlocking the rear-compartment displays"
(
Y
page 63). Instead of selecting a rear-
compartment display, select
SplitView
SplitView
.
From the front-passenger side
Activating
X
To select the SPLITVIEW display using the
COMAND remote control (
Y
page 241):
turn thumbwheel : until the SPLITVIEW
icon appears in the window.
X
Press the u button on the COMAND
remote control.
Deactivating
X
Press the u button on the COMAND
remote control again.
The ù display changes to
On
On
.
The SPLITVIEW symbol is hidden in the
status bar.
The menu called up on the driver's side is
shown.
If COMAND is switched off by removing the
key from the ignition lock while SPLITVIEW is
activated and then switched on again within
30 minutes, SPLITVIEW is activated with the
last settings.
26
SPLITVIEW
At
a
glance