Mercedes-Benz S-Class 2014 COMAND Manual - Manual (Page 212)

Option 1: entering the passkey
X You can find information on this in the
"Authorizing (registering) a mobile phone"
section (
Y
page 125).
After successful authorization, the
Bluetooth ® audio device is connected and
starts playing.
Option 2: Secure Simple Pairing
i The Bluetooth ® audio device must
support Bluetooth ® version 2.1 for
connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on both devices that are to be
connected
For some Bluetooth
® audio devices, the
pairing must be confirmed within 10
seconds.
X If the number code displayed on
COMAND and on the Bluetooth ® audio
device is the same, select Yes Yes : press the
controller.
If you select Yes Yes , authorization continues
and the Bluetooth ® audio device is
connected. Playback starts.
If you select
No No , authorization will be
canceled.
External authorization
If COMAND does not find your Bluetooth ®
audio device, this may be due to particular
security settings on your Bluetooth ® audio
device. In this case, check whether your
Bluetooth ® audio device can locate
COMAND.
The Bluetooth
® device name of COMAND is
MB Bluetooth MB Bluetooth .
X Switch on Bluetooth ® audio mode
(
Y
page 212).
X To select Options Options : slide V¬ and press
the controller.
X To select Bluetooth Audio Devices Bluetooth Audio Devices :
press the controller.
X To select Connect Via Audio Device Connect Via Audio Device :
turn and press the controller.
Authorizing
X Start the authorization on the Bluetooth ®
audio device; see the operating
instructions of the Bluetooth ® audio
device.
After successful authorization, the
Bluetooth ® audio device is connected and
starts playing.
i With some Bluetooth ® audio devices,
playback must first be started on the device
itself so that COMAND can play the audio
files.
Reconnecting a Bluetooth ® audio
device
The Bluetooth ® audio profiles are connected
automatically under the following
circumstances:
R one of the last two mobile phones to have
been connected has also been used as a
Bluetooth ® audio player (if this function is
supported by the mobile phone).
R the mobile phone is automatically
connected. The Bluetooth ® audio player is
then connected.
i For an automatic connection with
COMAND, the telephone must be within
range.
210 Bluetooth ® audio mode
Media