Mercedes-Benz S-Class 2014 COMAND Manual - Manual (Page 42)

Consumption information is shown in the additional area.
Time settings
General information
When there is GPS reception, COMAND sets
the time and date automatically. You can also
adjust the time yourself in minute
increments, but the date cannot be changed.
i If you adjust the time in minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost. The tick next to
Automatic Time Automatic Time is removed. Switching
between summer and standard time
(
Y
page 41).
i The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order
to work properly:
R route guidance on routes with time-
dependent traffic guidance
R calculation of expected time of arrival
i With this function, you can set the time
for every display in the vehicle.
Setting the time manually
X
Press the Ø button.
The Vehicle menu appears.
X To select Time Time : slide V¬, turn and press
the controller.
A menu appears.
X To select Set Time Manually Set Time Manually : turn and
press the controller.
X Set the desired time.
The time is accepted.
Setting the time/date format
X Press the Ø button.
The Vehicle menu appears.
X To select Time Time : slide V¬, turn and press
the controller.
A menu appears.
X To select Format Format : turn and press the
controller.
The # dot indicates the current setting.
X Select the desired format.
Abbreviation Meaning
DD DD . MM MM . YYYY YYYY Day . Month . Year
(date format, four
digits)
YYYY YYYY / MM MM / DD DD Year/Month/Day
date format, year (all
four digits)
DD DD / MM MM / YYYY YYYY Day/Month/Year
date format, year (all
four digits)
HH HH : MM (24 hrs) MM (24 hrs) Hours : Minutes
(24 hour time
format)
HH HH : MM (AM/PM) MM (AM/PM) Hours : Minutes
(AM/PM time
format)
40
Time settings
Sys
tem
set
tings