Mercedes-Benz S-Class 2014 COMAND Manual - Manual (Page 238)

Adjusting the balance/fader
You can use balance to move the focus of the
sound between left and right.
You can use fader to shift the focus of the
sound between the front and rear seats.
X To display the menu bars: slide VÆ the
controller in media mode.
X To select Sound Sound in the menu bar: turn and
press the controller.
The menu with the last accessed setting
appears.
X Turn the controller until Balance/Fader Balance/Fader is
in the center.
X Slide VÆ the controller.
Rotary menus for balance and fader are
activated.
X To switch between the rotary menus: slide
XVY the controller.
X To set the desired Balance/Fader Balance/Fader
focuses: turn the controller.
Rotary menu and the image show the sound
focus set.
X To return to the menu: slide ZV the
controller.
X To return to the basic menu: press the
% button briefly.
Changing loudspeaker source
Select Select Sound Sound Source Source specifies which seat-
based media source shall be output on the
speaker system.
Example: A media source is being listened to
using headphones in the Rear Right Rear Right . If this
media source is to be listened to using the
sound system, Rear Rear Right Right must be selected
in Select Sound Source Select Sound Source .
X
To display the menu bars: slide VÆ the
controller in media mode.
X To select Sound Sound in the menu bar: turn and
press the controller.
The menu with the last accessed setting
appears.
X Turn the controller until Select Sound Select Sound
Source Source is in the center.
X Slide VÆ the controller.
Rotary menus for the speaker source are
activated.
X To set the desired speaker source: turn the
controller.
The segment, text and image show the
selected setting.
X To return to the menu: slide ZV the
controller.
X To return to the basic menu: press the
% button briefly.
236 Burmester ® high-end 3D surround sound system
Sou
nd