Mercedes-Benz S-Class 2014 COMAND Manual - Manual (Page 133)

i You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
the telephone display. After the call is
finished, you see the display of the previous
main application again.
The display does not switch to telephone
mode if you:
R accept the call via the Voice Control
System (see the separate operating
instructions).
R accept the call using the 6 button on
the multifunction steering wheel
Rejecting a call
X
Press the ~ button on COMAND or on
the multifunction steering wheel.
Making a call
Using the number keypad
X Call up the telephone basic menu
(
Y
page 129).
X Enter the digits using the number keypad.
i As soon as one of the numbers is touched,
the corresponding button is highlighted in
the display.
X To connect the call: press the 6
button on COMAND or on the multifunction
steering wheel.
Using the telephone basic menu
X Call up the telephone basic menu
(
Y
page 129).
X To select all numbers one after the other:
turn and press the controller each time.
Dialing a number:
X Press the 6 button on COMAND or on
the multifunction steering wheel.
Redial
X Call up the telephone basic menu
(
Y
page 129).
X
To select ° from the character list: turn
the controller and press to confirm.
or
X
If the telephone basic menu is displayed,
press the 6 button on COMAND.
The list of dialed numbers appears. The
most recently dialed number is at the top.
X To select a call: turn the controller.
X To make a call: press the controller.
Using the call list or COMAND phone
book
X Open a call list and select an entry
(
Y
page 138).
or
X
Call up the COMAND phone book and
select an entry (
Y
page 135).
X To make a call: press the controller or the
6 button.
Making a call via speed dial
You can save entries from the phone book in
the speed dial list and call them using speed
dial numbers (
Y
page 141).
Option 1:
X Hold down one of the number keys for
longer than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialing.
Option 2:
X To select a digit from the digit bar in the
basic telephone menu: turn the controller.
X Press the controller for longer than two
seconds.
The telephone basic menu displays the
selected entry. This initiates dialing.
Using the telephone
131
Telep
hone
Z