Mercedes-Benz S-Class 2014 COMAND Manual - Manual (Page 207)

X
Select the displayed data medium.
The data medium is loaded.
If the data medium contains files that can
be copied, a selection menu appears.
2. Selecting files
X To select All Files All Files : turn the controller
and press to confirm
This command copies all files from the
selected data medium. The symbol in front
of All Files All Files is filled in. All subsequent
entries have a tick O beside them.
X Select a folder.
A tick O next to the folder entry highlights
the selection.
3. Confirming your selection
X To select Continue Continue : turn the controller and
press to confirm.
The copying menu appears.
4. Starting the copying process
In the example, files are copied from a USB
stick to the MEDIA REGISTER.
X To select Start Start : press the controller.
i The selection of a target folder is optional.
If there is no target folder given, the
selected files are saved to the main
directory of the Media Register.
X To select Target Folder Target Folder : turn and press
the controller.
X Select a folder.
X Select Continue Continue .
X To select Start Start : press the controller.
The copying procedure starts and is shown
in the progress bar.
It may take some time for the copying
process to be completed, depending on the
amount of data. If there is not enough
memory space, a message to this effect
appears.
i It is possible to change to a different
function (e.g. radio) during the copying
procedure. The copying procedure
continues in the background. While the
copying procedure is taking place, this is
shown by a symbol in the status bar.
MEDIA REGISTER
205
Medi
a
Z