Kontron NSW1U IP Network Server - Manual (Page 13)

Kontron IP Network Server NSW1U
December 2009 Product Guide, rev. 1.4
13
Kontron IP Network Server NSW1U Features—NSW1U Network Server
Table 1. Kontron IP Network Server NSW1U Features
Feature Description
Compact, high-density
system
Rack-mount server with a height of 1U (1.75 inches) and a depth of 20.0 inches
Configuration flexibility
One-way capability in low profile and cost/value-effective packaging
Stand-alone system
Dual-Core Intel
® Xeon ® processor 5100 series or Quad-Core Intel ® Xeon ®
processor 5400 series.
Note: Quad-Core Intel
® Xeon ® processor 5400 series support is available only on
NSW1U-R and NSW1U-B that have product codes NSRA0201W, NSRD0201W, or
NSRA0401W
Serviceability
Rear access to hot-swappable power supplies
Front access to optical drive
Availability
Two hot-swappable 450 W power supplies in a redundant (1+1) configuration
Integrated software RAID 0 or RAID 1 with two internal SATA disk drives
Memory rank sparing
Manageability
Remote management and diagnostics support
Emergency management port (serial and LAN)
IPMI 2.0 compliant
Support for SMART Embedded USB Solid-State Drive (optional)
Upgradeability and
investment protection
Supports Dual-Core Intel ® Xeon ® processor 5100 series or Quad-Core Intel ®
Xeon ® processor 5400 series
Multi-generational chassis
Supports
Intel ® 64 architecture
System-level scalability
24 Gbyte DDR2-667 MHz Registered SDRAM FBDIMM memory support
Single Dual-Core Intel
® Xeon ® processor 5100 series or Quad-Core Intel ® Xeon ®
processor 5400 series.
Note: Quad-Core Intel
® Xeon ® processor 5400 series support is available only on
NSW1U-R and NSW1U-B that have product codes NSRA0201W, NSRD0201W, or
NSRA0401W
Riser cards support one full-length, full-height PCI Express or PCI/PCI-X slot
Two internal fixed 3.5-inch SATA hard disk drives
Support for low-profile PATA optical drive (CD or DVD)
Front panel
Power switch
Reset switch
NMI switch
ID switch
Main power LED
System status LED
HDD activity LED
NIC activity LED
ID LED
I/O
Front Access
• Four standard GbE NIC ports on
NSW1U-F and NSW1U-B only (no
front NIC ports on NSW1U-R)
• Four optional NIC ports (requires
PRO/1000 PT PCI Express card)
• Serial B/COM2 port (RJ45)
• One USB 2.0 port
Rear Access
• Four standard GbE NIC ports on
NSW1U-R and NSW1U-B only (no
rear NIC ports on NSW1U-F)
• Four optional NIC ports (requires
PRO/1000 PT PCI Express card)
• Serial B/COM2 port (RJ45)
• Two USB 2.0 ports
• GCM 100 Mbps management port
(requires optional Intel ® RMM2 kit)
• Two PS/2 ports for keyboard and
mouse
• Video port