Kontron Micro Client 3 104 - Manual (Page 59)

10. Standard Interfaces – Pin Assignments Micro Client 3 – User’s Guide (Version 1.0)
10.
Standard Interfaces – Pin Assignments
Low-active signals are indicated by a minus sign.
10.1.1. Power Connector
Pin Signal Name 3-pin POWER SUBCON (male)
1 0V input (-24 VDC polarity on the unit)
2 NC
3 +24 VDC (input)
10.1.2. Serial interface COM (RS232)
Pin Signal Name 9-pin D-SUB Connector (male)
1 DCD (Data Carrier Detect)
2 RXD (Receive Data)
3 TXD (Transmit Data)
4 DTR (Data Terminal Ready)
5 GND (Signal Ground)
6 DSR (Data Set Ready)
7 RTS (Request to Send)
8 CTS (Clear to Send)
9 RI (Ring Indicator)
www.kontron.com 57