Kontron Micro Client 3 104 - Manual (Page 37)

7. Product Description Micro Client 3 – User’s Guide (Version 1.0)
The MC 3 system can be installed with the optional VESA ® 100 compliant adapter plate.
 MC 3 104/121/150/170 is VESA ® 100 compliant (refer to Fig. 38).
 MC 3W 156 is also VESA ® 100 compliant (refer to Fig. 39).
7.6.1. VESA ® Mounting Plate (Option)
The device is designed to be operated in vertical position (with the interfaces downwards) mounted to a VESA® 100
compliant mounting system.
Each of the VESA ® 100 compliant mounting plates must be fastened to the appropriate
MC 3 system (refer to pos. 3, Fig. 36 and Fig. 37) with four M4x6 metric screws.
Do not use longer screws than the original screws provided (M4x6 metric). Using longer screws damage
the internal components of the system.
Please observe the warning label “Hot Surface” shown in Fig. 36 and Fig. 37on the rear side of the
cabinet. The MC 3/MC3W chassis may be hot during operation and should not be touched without taking
care.
The material on bottom surface of the enclosure interior where the MC 3/MC 3W is to be mounted, shall
keep at least flammability class UL 94-5VB. Don’t put flammable materials under the device.
Fig. 38: Rear and bottom view of the mounting plate VESA ® 100 compliant for MC 3 104
www.kontron.com 35