Dip-switch settings (sw1) for lpctocan adapter, Sja base address (sw1: 1-3), Sja-interrupt (sw1: 4-6) – Kontron Micro Client 3 104 User Manual
Page 31: Fig. 28: dip-switch of the lpctocan adapter, Table 4: sja-base address settings, Table 5: sja-interrupt settings
7. Product Description
Micro Client 3 – User’s Guide (Version 1.0)
7.3.2. DIP-Switch Settings (SW1) for LPCtoCAN Adapter
The DIP-switch is for setting the SJA1000-base address, the SJA-interrupt, and the NVRAM operation mode.
Factory settings for one LPCtoCAN adapter
Factory settings for two LPCtoCAN adapters
Fig. 28: DIP-Switch of the LPCtoCAN Adapter
Fig. 29: Color legend used in the Table 4, Table 5 and Table 6:
7.3.2.1.
SJA Base Address (SW1: 1-3)
Switch
Address Range
3
2
1
OFF
OFF
OFF
0x340 to 0x35F
*
OFF
OFF
ON
0x320 to 0x33F
*
OFF
ON
OFF
0x300 to 0x31F
OFF
ON
ON
0x220 to 0x23F
*
ON
OFF
OFF
0x200 to 0x21F
*
ON
OFF
ON
0x140 to 0x15F
*
ON
ON
OFF
0x120 to 0x13F
*
ON
ON
ON
0x100 to 0x11F
*
Table 4: SJA-Base Address Settings
7.3.2.2.
SJA-Interrupt (SW1: 4-6)
Switch
IRQ
6
5
4
OFF
OFF
OFF
disabled
*
OFF
OFF
ON
15
*
OFF
ON
OFF
11
*
OFF
ON
ON
10
ON
OFF
OFF
7
*
ON
OFF
ON
5
*
ON
ON
OFF
4
*
ON
ON
ON
3
*
Table 5: SJA-Interrupt Settings
*These settings are not usable for Micro Client 3!
*These settings are not usable for Micro Client 3!
www.kontron.com
29