Kontron Micro Client 3 104 - Manual (Page 11)

4. General Safety Instructions for IT Equipment Micro Client 3 – User’s Guide (Version 1.0)
 The DC-input must fulfill SELV requirements of EN60950-1 standard.
 The chassis of the MC 3 system must be protective earthed by establishing a large-area contact between the earth
screw (at the rear bottom side) and an appropriate grounding connection point.
 It must be assumed that safe operation is no longer possible,
• if the device has visible damage or
• if the device no longer functions.
In these cases the device must be shut down and secured against unintentional operation.
www.kontron.com 9