Kontron AM5010 BIOS - Manual (Page 99)

AM4010/AM4011/AM5010 BIOS OEM Feature
ID 1022-2060, Rev. 2.0 Page 89
Clear Configuration Block
This function is used to clear the previously stored settings in the setup default override config-
uration block. When cleared, the Optimal and Fail-Safe default settings are no longer overrid-
den when used for booting. Clearing the configuration block does not affect the current settings
in use.
Optimal and Fail-Safe default settings: No
Override Structure present
This is a display only function which indicates whether an override structure is available or not.
Kontron EEPROM Release Version
This is a display only function which indicates the Kontron release version of the current over-
ride structure. The setting of this function is only valid if the override structure was provided by
Kontron.
OEM EEPROM Release Version
This is a display only function which indicates the OEM release version of the current override
structure.
Config. Block Activation Flag
This is a display only function and is reserved for Kontron internal use.
SETTING DESCRIPTION
No This is the BIOS default setting and is automatically set to “No” after the configuration block
is cleared.
Yes Use this setting to enable clearing of the configuration block during the next boot operation.