Kontron AM5010 BIOS - Manual (Page 100)

OEM Feature AM4010/AM4011/AM5010 BIOS
Page 90 ID 1022-2060, Rev. 2.0
WRITE PROTECTION SCREEN
This screen provides functions for specifying the BIOS Flash write protection configuration settings.
Firmware Flash SDO
This function is used to provide write protection for the BIOS Flash under all circumstances.
Optimal and Fail-Safe default setting: No
One Shot WR Enable SDO
This function is used to enable writing to the BIOS Flash for the current session until the next
boot operation. If the Firmware Flash is set to Yes, this function can be used to override the
BIOS Flash write protection.
Optimal and Fail-Safe default setting: No
SETTING DESCRIPTION
No Use this setting to disable the BIOS Flash write protection.
If No is selected, writing to the BIOS Flash device is possible.
Yes Use this setting to enable BIOS Flash write protection.
If Yes is selected, it is not possible to write to the BIOS Flash.
SETTING DESCRIPTION
No This setting is automatically selected by the BIOS.
Yes Use this setting to disable BIOS Flash write protection when the Firmware Flash is set to Yes.
The system sets this function back to No automatically after booting.