Kontron AM5010 BIOS - Manual (Page 65)

AM4010/AM4011/AM5010 BIOS PCI/PnP Setup
ID 1022-2060, Rev. 2.0 Page 55
4. PCI/PnP Setup
Select the PCI/PnP tab to enter the PCI/PnP Setup screen. This screen provides functions for
specifying configuration settings.
Clear NVRAM
This function is used to force the BIOS to clear the Non-Volatile Random Access Memory
(NVRAM).
Optimal and Fail-Safe default settings: No
Plug and Play O/S
Optimal and Fail-Safe default settings: No
SETTING DESCRIPTION
No This setting is automatically selected by the BIOS.
Yes Use this setting to clear the NVRAM before the system is booted.
The system sets this function back to No automatically after booting.
SETTING DESCRIPTION
No Use this setting for operating systems that do not meet the Plug and Play specifications. It
allows the BIOS to configure all the devices in the system.
Yes Use this setting to permit the operating system to change the interrupt, I/O, and DMA set-
tings. This setting is for a system which is running a Plug and Play aware operating system.